info@sinotools.com
Home About UsCategoriesCatalog DownloadLogisticsFinancingOnline ShowNewsContact Us
Keyword:

Pliers, Hammers, Screwdrivers, Pipe Wrenches

Home > Products > Hand Tools > Gear Pullers

Wholesale Gear Pullers

Wholesale Gear Pullers at SINOTOOLS, available in classic claw pullers and puller sets. Heat-treated and with a surface anti-corrosion coating, our wholesale pullers have very good strength and longevity.

As a professional hand tools supplier in China, we are committed to providing the best products and services to our customers worldwide. Send your inquiry now to get our latest catalog and a free quote. Feel free to contact us anytime.

E-mail: info@sinotools.com



What Are Gear Pullers?

Gear pullers are tools used to remove a bearing set from a rotating machine shaft or from a blind bearing bore. The most common application is to remove a set of caged ball bearings or tapered bearings from a rotating shaft, such as an automotive transmission. These tools are made of high quality carbon steel so they have excellent hardness for durability.

Gear pullers are an essential tool for removing shaft mounted components in many industries. Whether it is a small task like auto repair or a large industry like power generation, aerospace, railroads, shipbuilding, etc., gear pullers are widely used. Gear pullers are commonly used for the maintenance of rotating equipment. For example, bearings, gears, sleeves, couplers, etc. In auto repair applications, pullers are often used along with other auto tools.

2-Jaw/3-Jaw Gear Pullers

There are several types of gear pullers on the market. Two-jaw and three-jaw gear bearing pullers are the most common. The two-jaw bearing puller is used to remove bearings with an inside diameter smaller than the width of the puller. Three-jaw bearing pullers are used to remove bearings with an inside diameter greater than the width of the jaws.

The arms have fingers on the end that bend over the race behind the bearing. The center screw of the puller is torqued so it pushes against the top of the shaft and upward thrust is applied to the race of the bearing. The arms and fingers are interchangeable so that the same puller can accommodate a variety of bearing and shaft sizes and lengths.


Read More

2 Jaws Bar Type Gear Puller

Item No.: T06400

Spec.: 1#(80x100), 2#(120x100), 3#(150x150), 4#(200x150), 5#(250x200)

Inquire Now
Armature Bearing Puller

Item No.: T06399

Spec.: 1#, 2#, 3#

Inquire Now
2 Jaws Gear Puller

Item No.: T06398

Spec.: 3"(15-80mm), 4"(20-120mm), 6"(25-160), 8"(30-210), 10"(40-260mm)

Inquire Now
Gear Puller

Item No.: T06397

Spec.: 3" 4" 6" 8" 10"

Inquire Now
Pitman Arm Puller

Item No.: T06396

Spec.: Opening size 1 5/16" (33mm). Pull travel 2 1/2" (63mm).

Inquire Now
3 Jaws Gear Puller

Item No.: T06395

Spec.: 3"(15-80mm), 4"(20-120mm), 6"(25-160), 8"(30-210), 10"(40-260mm), 12"(50-320mm), 14"(80-370mm), 16"(80-420mm), 20"(80-520mm), 28"(100-720mm)

Inquire Now
3 Jaws Gear Puller

Item No.: T06394

Spec.: 3"(15-80mm), 4"(20-120mm), 6"(25-160), 8"(30-210), 10"(40-260mm), 12"(50-320mm), 14"(80-370mm), 16"(80-420mm), 20"(80-520mm), 28"(100-720mm)

Inquire Now
Tie Rod Puller

Item No.: T06393

Spec.: 44x18mm

Inquire Now
3 Jaws Gear Puller

Item No.: T06392

Spec.: 3"(15-80mm), 4"(20-120mm), 6"(25-160), 8"(30-210), 10"(40-260mm), 12"(50-320mm), 14"(80-370mm), 16"(80-420mm), 20"(80-520mm), 28"(100-720mm)

Inquire Now
Ball Joint Separator

Item No.: T06391

Spec.: Reach: 20-50mm Opening: 19mm

Inquire Now
13Pc Universal Puller Set

Item No.: T06388

Spec.: 2-leg sliding bar 3-leg sliding bar arms 100 mm (3 pcs.) arms 200 mm (3 pcs.) arms 250 mm (3 pcs.) fine threat spindle 160 mm fine threat spindle 270 mm

Inquire Now
  • Hand Tools
  • Power Tools
Contact Us
Website

Website

Wechat

WhatsApp

Copyright © Sinotools Industrial All rights reserved. Technical Support:    

WeChat

Whatsapp

Skype

E-mail

TOP