Pliers, Hammers, Screwdrivers, Pipe Wrenches
Hand tools safety is very important in every workplace. The safety and health of workers is necessary for every job. Safety is always the most important point to emphasize: complacency and lack of awareness are major causes of injuries.
People working in warehouses, construction sites or industrial grounds may use hand tools more frequently, but even office workers use scissors, box cutters and utility knives. Hand tools safety is very important in every workplace. The safety and health of workers is necessary for every job.
In fact, in these seemingly "safe" workplaces, such as offices, safety is still the most important point to emphasize: complacency and lack of safety awareness are major causes of injuries. In addition, employees who do not use tools are often less likely to know how to use them properly. It is easy to deviate from practice when it comes to hand tools safety.
It's worth highlighting cutting tools, which pose a risk of cutting, tearing and puncturing. The National Safety Council lists these as one of the top three injuries that cause employees to be unable to work. Therefore, we have prepared these five hand tools safety tips that we hope will help ensure the safety of all workers.
1: Reserve specific areas where workers use hand tools
If possible, arrange a designated place for your workers to use hand tools, especially cutting tools. The requirement to go to a specific area to use tools will help workers to be more focused when working. Other workers or visitors will also be aware that this is an area where people are using potentially dangerous tools and they need to be cautious about this area.
It's also a great way to stay organized. Keep everything related to using cutting tools (e.g. PPE, safety tools, etc.) all in one place. Workers can easily find the protection they need. The easier it is to stay safe, the more likely workers are to fully comply with all protocols.
2: Keep PPE and hand tools in good working condition
Hand tool safety must first ensure that the tool is in proper working order. For cutting tools, this means that the blades must be in good condition. Blunt blades are dangerous because they require more force to cut. This increases the likelihood of the tool slipping.
The blades should also be clean, free of large debris and, if metal, should not be rusty. When it is time to replace a blade, the used blade must be discarded in a container specifically for sharp objects. The tool itself should have no loose parts or cracks. Any tool that does not meet these standards should be repaired or replaced.
3: Provide proper PPE
All personal protective equipment must be in good condition. Equally important: PPE must fit properly. As an example, if safety gloves are bulky, it will not allow workers to move freely and may discourage them from wearing hand protection. Providing the right gloves is important because lack of hand protection is a major cause of injury.
PPE should be cleaned regularly, especially when several workers share the same set of PPE. The same reason applies to the cleaning tools here: it's just good hygiene.
4: Choose the safest tool
High-quality tools are more durable and safer than thin, cheap ones. The well-being and safety of your employees is worth the investment. Better quality leads to better hand tools safety.
Look for tools that are ergonomically designed. This will reduce the likelihood of fatigue and repetitive stress damage. Make sure the handle surface is easy to grip, which will reduce the likelihood of slips and falls.
When choosing a cutting tool, also pay attention to pick the top-quality cut off blades that make tasks easier and safer.
5: Regularly teach your workers about hand tools safety
Improper use is one of the most common causes of injury to workers while using tools. Make sure your employees are regularly trained in hand tools safety to teach them the proper methods and rules for using tools. Remember that workers are also an important factor in work safety.
It's easy to stay safe
Safety isn't complicated, but it must be taken seriously to avoid injury. Simple precautions, such as these five safety tips above, may reduce the probability of employee workplace injuries.
Always consider hand tools safety, and it will be one of the best decisions you ever make. If you have any interest or needs, welcome to contact us to learn more.
Recommend Products: What are Twist Drill Bits Construction Tools Used in Building Diamond Saw Blades vs. Other Cutting Blades Paint Sprayer vs. Roller Grinding Wheels Applications
Copyright © Sinotools Industrial All rights reserved. Technical Support: